No Comments

How to Reduce TDS in Water?

How to remove TDS from water?

The total dissolved solids (TDS) measure the water’s dissolved inorganic and organic components. Magnesium, calcium, and potassium are the mostly found inorganic substances in water. The presence of these minerals in the water is generally good, but when the concentration rises too high, it can be concerning. Calcium, magnesium, and other commonly found TDS elements are generally safe. However, heavy metals, including lead, mercury, arsenic, and fluoride, pose serious health risks. Before learning how to reduce TDS in water, we should know why to reduce TDS in water.

Why Is It Important to Check TDS Level?

According to a study, the groundwater in about 20% of India’s geographical area has dangerous amounts of arsenic. Studies also show that many states in India have uranium, lead and iron. In addition, cadmium and chromium are found in some parts of our country.

If the TDS level is high (above 500 mg/l), the water’s quality is poor, and you shouldn’t consume it without first purifying it. In addition to the TDS level, there are about 50 more distinct pollutants.

If the TDS levels in the water are too high, it can cause various health issues. The presence of minerals such as potassium, sodium, and chlorides in the water raises the TDS level. However, toxic ions like lead, nitrate, cadmium, and arsenic can cause severe health problems.

Regulatory authorities do not regulate TDS as a health hazard as it is not a measure of any particular impurity. Also, high TDS levels can alter the taste and smell of water.

How to Reduce TDS in Water?

The best way to reduce TDS in water is with the use of an RO water purifier. Reverse Osmosis technology forces water through a fine membrane with microscopic pores to eliminate even the smallest particles. The membrane allows particles smaller than 0.0001 microns to pass through it.

Different water filters purify water using various technologies. It would be best if you chose a water purifier based on the water quality in your location. You must have a RO water filter if you use groundwater or water with a TDS of more than 500 ppm. Reverse osmosis (RO) technology is used in RO water filters to purify water from all contaminants.

Keeping vital minerals in water is crucial because they greatly benefit our general health. The majority of RO filters don’t even leave behind the necessary minerals, which is harmful to human health. Therefore, you should determine whether the water purifier you choose uses a method that keeps the essential minerals in the water.

Knight Water Filter Retains Essential Minerals

Places receiving water with a TDS greater than 500 ppm can benefit from the QNET’s Knight Alkaline RO water filter. Water that has a TDS level exceeding 500 ppm is considered hard water, which can harm our pipes and kitchenware. As it has harmful germs and other pollutants, it is also bad to consume.

The Knight Alkaline RO water filter, available from QNET India, keeps all the beneficial minerals like calcium and magnesium while eliminating all undesirable and dangerous germs. This water filter has a five-stage filtration system. The filtration procedure also ensures that all germs, viruses, and unpleasant odours are eradicated.

Salient Features of Knight Alkaline RO Water Purifier

Knight Alkaline Water Filter/How to Reduce in Water

A built-in Kitchen and Dairy Care filter on the Knight Alkaline RO water purifier offers sterile water. You can use this sterilised water to clean infant supplies, produce, and cutlery. The only place to buy the Knight Alkaline RO water filter is QNET India.

By removing heavy metals, bacteria, and dangerous water-borne microbes, the advanced RO Membrane ensures 99. 9% water purification. The Mineraliser filter also adds minerals like calcium, magnesium, and potassium to offer healthier and tastier alkaline water.

But the dual benefit of purification and sterilisation makes the MyHomePlus KNIGHT Water purifier unique. The advanced In and Out sterilisation guarantees 100% hygiene in addition to pure drinking water.

Through in-tank UV light, inner water microorganisms are sterilised during the procedure. Every four and a half hours, for 90 minutes, sterilisation occurs. Additionally, the sterilising procedure involves external sterilisation with the ease of removable faucets and a water tray for simple cleaning. So, if you are wondering how to reduce TDS in water, you can use the MyHomePlus KNIGHT Water purifier.

You might also like
Tags: , , , , ,

More Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Fill out this field
Fill out this field
Please enter a valid email address.
You need to agree with the terms to proceed